sub_banner_news
Home / News / Industry News / Laser Tattoo Removal Machine Buying Guide

Laser Tattoo Removal Machine Buying Guide

Views: 13     Author: BVLASER     Publish Time: 2023-08-07      Origin: Site

Tattoos are becoming more and more popular in the world. Why? Because people think tattoos are image symbols that telling other people what they believe or like. You never know why people want to get a tattoo on their skin. Maybe they think they have the right to decide how they look like.


According to research in America,  there are about 45 million people have tattoos, among which there are 36% of people are 18-25 years old and 40% are 26 to 40 years old.


laser tattoo removal machine


Just as the reasons of why people get tattoos, there are various reasons why they want to get tattoo removal.


Here are some of the most common reasons people seek tattoo removal:


1. The tattoo is an ex's name.

2. People tired of having limited clothing options.

3. People don't want their children to see it.

4. The tattoo is limiting acceptance to jobs or military.

5. Artist did poor quality work.

6. The tattoo has faded over time.

7. Attitudes toward the tattoo's meaning have changed.


The tattoo removal usually takes several treatments, that depends on the color and area of the tattoo. So, the total cost of tattoo removal will be expensive.


laser tattoo removal machine-1


Bvlaser is a professional laser tattoo removal machine manufacturer, we have picosecond laser tattoo removal machine and Q switched ND YAG laser tattoo removal machine for sale. If you want to be laser tattoo removal practitioners, then you should read this guidepost to buy a suitable laser tattoo removal machine.


Here is the glance of this post


1. Q switched ND YAG Laser Tattoo Removal Machine Working Theory

2. Q switch technique

3. The Peak Power

4. The Wavelength

5. Buy Directly From The Laser Tattoo Removal Machine Manufacturer


Q switched ND YAG Laser Tattoo Removal Machine Working Theory


Q switched ND YAG laser tattoo removal machine uses the theory that the specific wavelengths (532nm, 1064nm and 1320nm) of the laser will be absorbed by specific pigment. The specific pigment after absorbing the high energy of the laser could cause them to swell and explode to partial fragments, and then these fragments will be shot out of the body, and the other pigment fragments will be removed by your body's immune system sometime.

Because the normal skin absorbs little energy induced by laser at the wavelength of 1064nm,1320nm or 532nm, the laser could selectively target and destroy tattoos or pigments while leaving and won't bring damage to the normal tissue. The treatment is safe and convenient without downtime and side effects.


laser tattoo removal machine-2

laser tattoo removal machine-3


Q Switch Nd.YAG Technique:


Q switch is a technique for obtaining energetic short (but not ultrashort) pulses from a laser by modulating the intracavity losses and thus the "Q" factor of the laser resonator. The technique is mainly applied for the generation of nanosecond pulses of high energy and peak power with solid-state bulk lasers.

It can make these specific pigments instantly swell and explode to powder so that it greatly reduced treatment time and effectively improved treatment efficiency. At the same time, the normal tissue can hardly absorb energy and won’t be hurt.


The Peak Power


Power matters for getting quality tattoo removal results with each treatment. Some systems may provide adequate fading results for the first few treatments, but do not have sufficient power to break up the ink of stubborn tattoos deep within the dermis. To avoid this problem, it is important to consider peak power as you make your laser purchasing decision.


Peak power is a result of pulse width and energy – the smaller the pulse width and the greater the energy production, the higher the peak power. Higher peak power levels allow practitioners to treat tattoos at greater fluences without compromising on laser treatment spot size. In all, peak power allows you to get better removal results for increased patient satisfaction.


laser tattoo removal machine-4


The Wavelength:


Different colors of tattoo ink absorb different wavelengths of energy – meaning that tattoo removal practitioners switch between different wavelengths of laser energy when treating tattoos. Understanding the capabilities of different wavelengths will greatly guide your choice of laser.


There are three common types of Q-switched lasers in the tattoo removal industry: Nd:YAG, Ruby, and Alexandrite.


The go-to laser for most tattoo removal practitioners is an Nd:YAG laser because it is capable of producing the most versatile wavelengths: 1064nm and 532nm.
The 1064nm wavelength is a powerhouse for treating black, blue, and other dark ink colors.
The 532nm wavelength is highly effective for removing red, orange, pink, and other bright colors.
The 1320nm laser, also called blackdoll. It's usually for the skin whitening, vascular therapy.


laser tattoo removal machine-5


Buy Directly From The Laser Tattoo Removal Machine Manufacturer


BVLASER is a leading beauty equipment manufacturer in China. Established in 2010, Bestview Laser takes the lead in applying advanced Q-switch Laser and Intense pulsed light in the medical and beauty industry. Professional R & D center and large factory lies in Shenzhen, Nanjing and Zhengzhou China, focusing on the research and development of new laser apparatus and cutting edge beauty equipment. The cores of the technical and management team have more than 10 years of industry experience and have rich theoretical and practical experience. It is a professional team with rich experience and a great many ground-breaking innovations in China's few beauty fields.


Products

Contact us

BLDG 5, 2-1, Liandong U Valley Kechuangyuan1, Hengyi Road, Economic, 210038, Nanjing City, China
 
Tel: 0086 19503817280
Contact us
Copyright 2024 BVLASER | All Rights Reserved